KYB Shocks & Struts Strut Mounts Front CADILLAC DeVille 1994-99 CADILLAC Eldorado 1993-02 CADILLAC S SM5282

Shocks & Struts Strut Mounts Front by KYB for the front position. Bouncing, nose dive under braking and uneven tire wear are signs they are worn. The fitment section lists 12 applications.

Key features

• Front position

Specifications

• Brand: KYB
• Part type: Shock
• Position: Front
• Model years: 1994–1999

Fitment

• 1994 - 1996 Cadillac Commercial Chassis Base, Brougham
• 1994 - 1999 Cadillac DeVille Base, Concours
• 1996 - 1999 Cadillac DeVille d'Elegance
• 1993 - 1997 Cadillac Eldorado Base
• 1998 - 2002 Cadillac Eldorado ESC
• 1995 - 2002 Cadillac Eldorado ETC
• 1993 Cadillac Eldorado Sport
• 1993 - 1994 Cadillac Eldorado Touring
• 1994 - 1996 Cadillac Fleetwood Brougham, Base
• 1993 - 1994 Cadillac Seville Base
• 1994 - 1997 Cadillac Seville SLS
• 1993 - 1997 Cadillac Seville STS

What it does

Shocks and struts control how the springs move, keeping the tires on the road over bumps. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.

Installation & tips

• Replace shocks in pairs on the same axle, and get an alignment after strut work.
• Strut mounts: Often worn at the same time.
• Alignment: Needed after strut replacement.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
12 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Check the position: this part is listed as front.
• Measure the part you are replacing and compare it with the specifications above.
• Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.