KYB OEM Front Strut Mount for 1989-1998 Nissan 240SX

KYB OEM Front Strut Mount for the 1989–1998 Nissan 240SX. Shocks and struts control how the springs move, keeping the tires on the road over bumps. The fitment section lists 3 applications for the 1989–1998 Nissan 240SX.

Key features

• Front position

Specifications

• Brand: KYB
• Part type: Shock
• Position: Front

Fitment for the 1989–1998 Nissan 240SX

• 1991 - 1998 Nissan 240SX LE
• 1989 - 1998 Nissan 240SX SE, Base
• 1989 - 1990 Nissan 240SX XE

Check your year, model, engine and trim against this list before you order.

What it does

Shocks and struts are normally replaced in pairs on the same axle. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.

Installation & tips

• Replace shocks in pairs on the same axle, and get an alignment after strut work.
• Strut mounts: Often worn at the same time.
• Alignment: Needed after strut replacement.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
3 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (1989–1998 Nissan 240SX).
• Check the position: this part is listed as front.
• Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.