Yellow Speed Racing
Yellow Speed Racing Rear 6 Piston Ultra Big Brake Kit - BMW M5 2000-2003 (E39)
Yellow Speed Racing Rear 6 Piston Ultra Big Brake Kit - BMW M5 2000-2003 (E39)
Part number: YS02R-BM-03H-018(V)
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: BMW M5Fitment notes & questions
Rear 6 Piston Ultra Big Brake Kit by Yellow Speed Racing, made to fit the 2000–2003 BMW M5 2000-2003 as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Key features
- Part numbers with (X) cannot retain O.E.M handbrake functionality
- Part numbers with (V) retain the O.E.M. handbrake functionality
- Part numbers with (X)(★) can retain O.E.M. handbrake functionality with use of a " YSR Handbrake Adapter System ", which is sold separately by Yellow Speed Racing, USA
- 330mm x 28mm | (12.99" x 1.09")
- 356mm x 28mm | (14.02" x 1.09")
- 356mm x 32mm | (14.02" x 1.26")
- 380mm x 32mm | (14.96" x 1.26")
- Forged billet aluminum split design calipers with anti-rust coating, featuring vented aluminum pistons standard for improved heat transfer resistance
Specifications
- Brand: Yellow Speed Racing
- Part type: Brake part
- Position: Rear
- Vehicle Compatibility: 00-03 BMW M5 (E39); 5x120 lug pattern
- Orientation: Rear
Options
- Rotor Size: 330mm x 28mm, 356mm x 28mm, 356mm x 32mm, 380mm x 32mm
- Caliper Model: YSCPR6a, YSCPR6b
Fitment for the 2000–2003 BMW M5 2000-2003
Listed for the 2000–2003 BMW M5 2000-2003, rear position. Check your year, model and trim against the title before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2000–2003 BMW M5 2000-2003).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

Before you order: BMW M5 brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: BMW M5.
- Specs, lead time and warranty come from Yellow Speed Racing and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Pistons · BMW Parts · Brakes
Questions about BMW M5 brake part
Will this fit my BMW M5?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.