Yellow Speed Racing Front 6 Piston Ultra Big Brake Kit - BMW X5 2007-2010 (E70)

Front 6 Piston Ultra Big Brake Kit by Yellow Speed Racing, made to fit the 2007–2010 BMW X5 2007-2010 as listed below. Brake parts are usually replaced per axle, left and right together, so the car stops straight.

Key features

• 345mm x 32mm | (13.58" x 1.26")
• 356mm x 32mm | (14.02" x 1.26")
• 365mm x 32mm | (14.37" x 1.26")
• Forged billet aluminum split design calipers with anti-rust coating, featuring vented aluminum pistons standard for improved heat transfer resistance
• Two-piece drilled, slotted, or drilled & slotted rotors with lightweight aluminum center bells. Rigid steel center bells are equipped for the rear rotors integrated with inner drums
• High Performance OEM+, Street, Sport or Competition Brake Pads
• CNC machined steel caliper mounting brackets for bolt-on caliper installation
• All hardware required for installation

Specifications

• Brand: Yellow Speed Racing
• Part type: Brake part
• Position: Front
• Orientation: Front

Options

• Rotor Size: 345mm x 32mm, 356mm x 32mm, 365mm x 32mm

Fitment for the 2007–2010 BMW X5 2007-2010

Listed for the 2007–2010 BMW X5 2007-2010, front position. Check your year, model and trim against the title before you order.

What it does

Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.

Installation & tips

• Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
• Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
• Hardware: Clips and pins wear with the pads.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (2007–2010 BMW X5 2007-2010).
• Check the position: this part is listed as front.
• Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.