DNJ
DNJ Valve Lifter Kit 2009-2016 Audi 3.0L
DNJ Valve Lifter Kit 2009-2016 Audi 3.0L
Part number: LFK244256
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: 2009β2016 AudiFitment notes & questions
Valve Lifter Kit from DNJ, listed for the 2009β2016 Audi with the 3.0L engine. A ticking noise from the top of the engine is often a worn or collapsed lifter. Part number: LFK244256.
Specifications
- Brand: DNJ
- Part type: Lifter set
- Part number: LFK244256
- Engine: 3.0L
- Includes: Lifters x24
- Engine Designation: CATA, CNRB, CPNA, CPNB
Fitment for the 2009β2016 Audi
- Years: 2009β2016
- Vehicles: Audi, Volkswagen A6 Quattro, A7 Quattro, A8 Quattro 3.0L 24V V6 2967cc
Check your year, model, engine and trim against this list before you order.
What it does
Lifters ride on the camshaft and pass its motion to the pushrods or valves. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Soak hydraulic lifters in oil before installation and set preload as your engine requires.
- Camshaft: Flat-tappet lifters should not go on a used cam.
- Pushrods: Check pushrods for straightness while they are out.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
What is the part number of this valve lifter kit?
LFK244256 (DNJ). Compare it with the number on your old part or in your parts catalog.
Is it sold individually or as a set?
The listing gives: Lifters x24.
Which engine is it for?
It is listed for the 3.0L engine in the 2009β2016 Audi. Check the engine code on your vehicle if it was offered with more than one engine.
Before you order
- Confirm your year, make, model, engine and trim match the fitment listed above (2009β2016 Audi 3.0L).
- Compare part number LFK244256 with your original part.
Good to know
- Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

About this lifter set for the Audi
Lifters wear together with the cam lobes, which is why they are usually replaced with the cam.
Fitment notes
- Listed for: 2009β2016 Audi.
- Model years: 2009β2016. If your year sits at the edge of the range, check the details above.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Camshaft. Flat-tappet lifters should not go on a used cam.
- Pushrods. Check pushrods for straightness while they are out.
More for your car: Audi Parts Β· All Lifters Β· Engine
Questions about Audi lifters
Will this fit my Audi?
What causes lifter tick?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.