Skunk2
Skunk2 Thermal Intake Manifold Gasket - S2K 00-05 Honda S2000
Skunk2 Thermal Intake Manifold Gasket - S2K 00-05 Honda S2000
Part number: 0HXKN
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Honda S2000Fitment notes & questions
Thermal Intake Manifold Gasket from Skunk2, listed for the 2000–2005 Honda S2000. Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in.
Specifications
- Brand: Skunk2
- Part type: Gasket
Fitment for the 2000–2005 Honda S2000
- 2000 - 2009 Honda S2000 Base
- 2008 - 2009 Honda S2000 CR
Check your year, model, engine and trim against this list before you order.
What it does
An old gasket gets hard and shrinks with heat cycles, which is when leaks start. A new gasket restores the seal. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.
Installation & tips
- Clean both mating surfaces completely and follow the bolt torque and sequence for your engine.
- Sealant where called for: Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets: Rubber grommets and old bolts are worth replacing if they are damaged.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2000–2005 Honda S2000).
About this gasket for the Honda S2000
Replacing a gasket is usually more labor than parts, so it pays to replace any others you disturb on the way in.
Fitment notes
- Listed for: Honda S2000.
- Model years: 00-05. Check your car's year falls inside this range.
- Specs, lead time and warranty come from Skunk2 and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Sealant where called for. Some joints need a dab of sealant at corners or seams; others must go on dry.
- Bolts and grommets. Rubber grommets and old bolts are worth replacing if they are damaged.
More for your car: Honda Intake Manifold Gaskets · Honda Parts · Engine
Questions about Honda S2000 gasket
Will this fit my Honda S2000?
Do I need sealant with this gasket?
Can I reuse an old gasket?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.