Skunk2
Skunk2 4 Bar MAP Sensor 2012+ Civic Si / 06-09 S2000 K24Z/ F22C
Skunk2 4 Bar MAP Sensor 2012+ Civic Si / 06-09 S2000 K24Z/ F22C
Part number: 0Q3BL
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
4 Bar MAP Sensor from Skunk2. Reading the trouble code first points you to the right sensor. The fitment section lists 7 applications.
Key features
- 1 BAR is for a normally aspirated engine
- 2 BAR will handle a forced induction up to 14.5 psi of boost
- 3 BAR will handle a forced induction up to 29.0 psi of boost
- 4 BAR will handle a forced induction up to 43.5 psi of boost
Specifications
- Brand: Skunk2
- Part type: Sensor
- Model years: 2012
Fitment
- 2012 - 2013 Honda Civic Base
- 2012 - 2015 Honda Civic EX-L, Hybrid-L, LX, DX, EX, Hybrid, Si, HF
- 2012 Honda Civic GX, Si HFP
- 2013 - 2015 Honda Civic Natural Gas, Touring
- 2015 Honda Civic SE
- 2006 - 2009 Honda S2000 Base
- 2008 - 2009 Honda S2000 CR
What it does
A failed sensor usually sets a check-engine code and can cause poor running or wrong readings. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.
Installation & tips
- Read the code, check the wiring and connector, and clear codes after the new sensor is in.
- Connector and wiring: Corroded connectors mimic a bad sensor.
- Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.
FAQ
How many vehicles is it listed for?
7 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Measure the part you are replacing and compare it with the specifications above.
About this sensor
Reading the trouble code first points you to the right sensor.
Fitment notes
- Specs, lead time and warranty come from Skunk2 and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Connector and wiring. Corroded connectors mimic a bad sensor.
More for your car: MAP Sensors · Batteries & electrical
Questions about sensor
Will this fit my car?
Will a new sensor clear my check-engine light?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.