Ridetech 60-61 Dodge Dart HQ Series Shock Rear 22199870

Series Shock Rear by Ridetech, made to fit the 1960–1961 Dodge Dart HQ as listed below. Shocks and struts control how the springs move, keeping the tires on the road over bumps.

Key features

• Rear position

Specifications

• Brand: Ridetech
• Part type: Shock
• Position: Rear

Fitment for the 1960–1961 Dodge Dart HQ

• 1960 - 1961 Dodge Dart Base, Phoenix, Pioneer

Check your year, model, engine and trim against this list before you order.

What it does

Shocks and struts are normally replaced in pairs on the same axle. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.

Installation & tips

• Replace shocks in pairs on the same axle, and get an alignment after strut work.
• Strut mounts: Often worn at the same time.
• Alignment: Needed after strut replacement.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (1960–1961 Dodge Dart HQ).
• Check the position: this part is listed as rear.
• Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.