PowerStop Power Stop 99-04 Chrysler 300M Rear Evolution Geomet Coated Rotor AR8335EVC
PowerStop Power Stop 99-04 Chrysler 300M Rear Evolution Geomet Coated Rotor AR8335EVC
Part number: 1U5BC
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Chrysler 300MFitment notes & questions
Rotor by Power Stop, made to fit the 1999–2004 Chrysler 300M as listed below. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 14 applications for the 1999–2004 Chrysler 300M.
Key features
- PSB Evolution Coated Rotor
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 1999–2004 Chrysler 300M
- 1999 - 2004 Chrysler 300M Base
- 2003 Chrysler 300M Pro-Am
- 2002 - 2004 Chrysler 300M Special
- 1993 - 1997 Chrysler Concorde Base
- 2002 - 2004 Chrysler Concorde Limited
- 1996 - 2004 Chrysler Concorde LXi, LX
- 1994 - 2001 Chrysler LHS Base
- 1993 - 2000 Dodge Intrepid Base
- 1993 - 2004 Dodge Intrepid ES
- 1998 - 2000 Dodge Intrepid ES Lujo
- 2004 Dodge Intrepid Police
- 2000 - 2002 Dodge Intrepid R/T
- 2001 - 2004 Dodge Intrepid SE
- 1998 - 2004 Dodge Intrepid SXT
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
14 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1999–2004 Chrysler 300M).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

About this brake part for the Chrysler 300M
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Chrysler 300M.
- Model years: 99-04. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Chrysler Parts · Brakes
Questions about Chrysler 300M brake part
Will this fit my Chrysler 300M?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.