PowerStop Power Stop 98-02 Mazda 626 Front Autospecialty Brake Kit KOE5169
PowerStop Power Stop 98-02 Mazda 626 Front Autospecialty Brake Kit KOE5169
Part number: 1V269
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Mazda 626Fitment notes & questions
Brake kit by Power Stop, made to fit the 1998–2002 Mazda 626 as listed below. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 3 applications for the 1998–2002 Mazda 626.
Key features
- Power Stop - Front OE Stock Replacement Low-Dust Ceramic Brake Pad and Rotor Kit
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 1998–2002 Mazda 626
- 1998 Mazda 626 DX
- 1998 - 2002 Mazda 626 ES, LX
- 2003 Mazda Protege LX, DX, SE, ES, Mazdaspeed
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
3 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1998–2002 Mazda 626).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Mazda 626
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Mazda 626.
- Model years: 98-02. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Mazda Parts · Brakes
Questions about Mazda 626 brake part
Will this fit my Mazda 626?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.