PowerStop Power Stop 98-01 Audi A6 Quattro Rear Evolution Drilled & Slotted Rotors - Pair EBR619XPR
PowerStop Power Stop 98-01 Audi A6 Quattro Rear Evolution Drilled & Slotted Rotors - Pair EBR619XPR
Part number: 1UP8V
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Audi A6 QuattroAWDFitment notes & questions
Rotors by Power Stop, made to fit the 1998–2001 Audi A6 Quattro as listed below. Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Key features
- Rear position
- Sold as a pair
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
- Sold as: Pair
Fitment for the 1998–2001 Audi A6 Quattro
- 1998 - 2001 Audi A6 Quattro Base, Avant
- 2001 Audi A6 Quattro Luxury
Check your year, model, engine and trim against this list before you order.
What it does
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Is it sold individually or as a set?
It is sold as a pair.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1998–2001 Audi A6 Quattro).
- Check the position: this part is listed as rear.
- Check the quantity: sold as a pair.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

Brake part for the Audi A6 Quattro: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: Audi A6 Quattro.
- Model years: 98-01. Check your car's year falls inside this range.
- Drivetrain: AWD. AWD and 4WD versions often use different parts from 2WD versions of the same car.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Audi Parts · Brakes
Questions about Audi A6 Quattro brake part
Will this fit my Audi A6 Quattro?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.