PowerStop Power Stop 97-06 Hyundai Elantra Rear Evolution Geomet Coated Rotor JBR774EVC
PowerStop Power Stop 97-06 Hyundai Elantra Rear Evolution Geomet Coated Rotor JBR774EVC
Part number: 1U5BM
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Hyundai ElantraFitment notes & questions
Rotor from Power Stop, listed for the 1997–2006 Hyundai Elantra. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 7 applications for the 1997–2006 Hyundai Elantra.
Key features
- PSB Evolution Coated Rotor
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 1997–2006 Hyundai Elantra
- 1997 - 1998 Hyundai Elantra Base
- 1997 - 1999 Hyundai Elantra GL
- 1997 - 2006 Hyundai Elantra GLS
- 2001 - 2006 Hyundai Elantra GT
- 2006 Hyundai Elantra Limited
- 1997 - 2001 Hyundai Tiburon Base
- 1997 - 1999 Hyundai Tiburon FX
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
7 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1997–2006 Hyundai Elantra).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Hyundai Elantra brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Hyundai Elantra.
- Model years: 97-06. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Hyundai Parts · Brakes
Questions about Hyundai Elantra brake part
Will this fit my Hyundai Elantra?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.