PowerStop Power Stop 96-99 Ford Taurus Front Evolution Geomet Coated Rotor AR8149EVC
PowerStop Power Stop 96-99 Ford Taurus Front Evolution Geomet Coated Rotor AR8149EVC
Part number: 1V4C3
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford TaurusFitment notes & questions
Rotor by Power Stop, made to fit the 1996–1999 Ford Taurus as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 19 applications for the 1996–1999 Ford Taurus.
Key features
- PSB Evolution Coated Rotor
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 1996–1999 Ford Taurus
- 1996 - 1997 Ford Taurus GL, G
- 1996 - 2004 Ford Taurus LX
- 1998 - 2007 Ford Taurus SE
- 1998 - 2003 Ford Taurus SE Comfort
- 2001 - 2007 Ford Taurus SEL
- 2001 - 2004 Ford Taurus SES
- 1996 - 1999 Ford Taurus SHO
- 1996 Ford Thunderbird Base
- 1996 - 1997 Ford Thunderbird LX
- 1996 Lincoln Continental Anniversary
- 1997 - 2002 Lincoln Continental Base
- 1995 Lincoln Continental Signature, Diamond Anniversary
- 1995 - 1997 Lincoln Continental Spinnaker Edition
- 1996 Lincoln Mark VIII Anniversary
- 1996 - 1998 Lincoln Mark VIII Base, LSC
- 1996 - 1997 Mercury Cougar XR-7
- 2001 - 2004 Mercury Sable LS Premium
- 2001 - 2005 Mercury Sable LS, GS
- 2005 Mercury Sable Platinum Edition
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
19 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1996–1999 Ford Taurus).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

About this brake part for the Ford Taurus
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Ford Taurus.
- Model years: 96-99. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Ford Parts · Brakes
Questions about Ford Taurus brake part
Will this fit my Ford Taurus?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.