PowerStop Power Stop 96-02 BMW Z3 Rear Evolution Drilled & Slotted Rotors - Pair EBR498XPR
PowerStop Power Stop 96-02 BMW Z3 Rear Evolution Drilled & Slotted Rotors - Pair EBR498XPR
Part number: 1UP8C
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: BMW Z3Fitment notes & questions
Power Stop Rotors for the 1996–2002 BMW Z3. Brake parts are usually replaced per axle, left and right together, so the car stops straight. The fitment section lists 8 applications for the 1996–2002 BMW Z3.
Key features
- Rear position
- Sold as a pair
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
- Sold as: Pair
Fitment for the 1996–2002 BMW Z3
- 1998 - 1999 BMW Z3 1.9i
- 2000 BMW Z3 2.0i
- 2001 - 2002 BMW Z3 2.2i, 3.0i
- 1997 - 2000 BMW Z3 2.8i
- 1996 - 1997 BMW Z3 Base
- 1999 - 2002 BMW Z3 M Coupe, Coupe
- 1998 - 2002 BMW Z3 M Roadster
- 1996 - 2002 BMW Z3 Roadster
Check your year, model, engine and trim against this list before you order.
What it does
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Is it sold individually or as a set?
It is sold as a pair.
How many vehicles is it listed for?
8 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1996–2002 BMW Z3).
- Check the position: this part is listed as rear.
- Check the quantity: sold as a pair.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Brake part for the BMW Z3: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: BMW Z3.
- Model years: 96-02. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · BMW Parts · Brakes
Questions about BMW Z3 brake part
Will this fit my BMW Z3?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.