PowerStop Power Stop 91-96 Toyota 4Runner Front Evolution Geomet Coated Rotor JBR740EVC
PowerStop Power Stop 91-96 Toyota 4Runner Front Evolution Geomet Coated Rotor JBR740EVC
Part number: 1UQGV
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Toyota 4RunnerFitment notes & questions
Rotor from Power Stop, listed for the 1991–1996 Toyota 4Runner. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 7 applications for the 1991–1996 Toyota 4Runner.
Key features
- PSB Evolution Coated Rotor
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 1991–1996 Toyota 4Runner
- 1996 Toyota 4Runner Limited, Base
- 1991 - 1996 Toyota 4Runner SR5
- 1996 - 1997 Toyota T100 DLX
- 1994 - 1995 Toyota T100 DX
- 1993 Toyota T100 One-Ton
- 1995 Toyota T100 One-Ton DLX
- 1993 - 1998 Toyota T100 SR5, Base
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
7 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1991–1996 Toyota 4Runner).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Brake part for the Toyota 4Runner: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: Toyota 4Runner.
- Model years: 91-96. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Toyota Parts · Brakes
Questions about Toyota 4Runner brake part
Will this fit my Toyota 4Runner?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.