PowerStop Power Stop 90-93 Mercedes-Benz 300SL Front Evolution Drilled & Slotted Rotors - Pair EBR418XPR
PowerStop Power Stop 90-93 Mercedes-Benz 300SL Front Evolution Drilled & Slotted Rotors - Pair EBR418XPR
Part number: 1UP6R
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Mercedes-Benz 300SLFitment notes & questions
Rotors from Power Stop, listed for the 1990–1993 Mercedes-Benz 300SL. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 5 applications for the 1990–1993 Mercedes-Benz 300SL.
Key features
- Front position
- Sold as a pair
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
- Sold as: Pair
Fitment for the 1990–1993 Mercedes-Benz 300SL
- 1990 - 1993 Mercedes-Benz 300SL Base
- 1992 - 1993 Mercedes-Benz 500E Base
- 1990 - 1993 Mercedes-Benz 500SL Base
- 1994 - 1997 Mercedes-Benz SL320 Base
- 1994 - 1998 Mercedes-Benz SL500 Base
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Is it sold individually or as a set?
It is sold as a pair.
How many vehicles is it listed for?
5 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1990–1993 Mercedes-Benz 300SL).
- Check the position: this part is listed as front.
- Check the quantity: sold as a pair.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Mercedes-Benz 300SL
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Mercedes-Benz 300SL.
- Model years: 90-93. If your year sits at the edge of the range, check the details above.
- Engine: the same car can take different parts for each engine option, so check yours.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Mercedes-Benz Parts · Brakes
Questions about Mercedes-Benz 300SL brake part
Will this fit my Mercedes-Benz 300SL?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.