PowerStop Power Stop 2016 Scion iA Front Z23 Evolution Sport Brake Pads w/Hardware Z23-1852

Brake pads by Power Stop, made to fit the 2016 Scion as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 4 applications for the 2016 Scion.

Key features

• Power Stop - Front Z23 Daily Driver Carbon-Fiber Ceramic Brake Pads with Hardware Kit
• Front position

Specifications

• Brand: Power Stop
• Part type: Brake part
• Position: Front

Fitment for the 2016 Scion

• 2016 Scion iA Base
• 2019 Toyota Yaris SE, CE
• 2019 - 2020 Toyota Yaris XLE, Base, S, Core, LE, L
• 2017 - 2018 Toyota Yaris iA Base

Check your year, model, engine and trim against this list before you order.

What it does

Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.

Installation & tips

• Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
• Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
• Hardware: Clips and pins wear with the pads.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
4 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (2016 Scion).
• Check the position: this part is listed as front.
• Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.