PowerStop Power Stop 2008 Mitsubishi Lancer Front Autospecialty Brake Rotor JBR1317
PowerStop Power Stop 2008 Mitsubishi Lancer Front Autospecialty Brake Rotor JBR1317
Part number: 1UPXQ
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Mitsubishi LancerFitment notes & questions
Power Stop Brake rotor for the 2008 Mitsubishi Lancer. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 8 applications for the 2008 Mitsubishi Lancer.
Key features
- Power Stop Autospecialty brake rotors provide a direct fit solution for original equipment fit and performance
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 2008 Mitsubishi Lancer
- 2011 - 2014 Mitsubishi Lancer ES Sportback
- 2008 - 2015 Mitsubishi Lancer Evolution MR, ES, DE, Evolution GSR, GTS
- 2010 Mitsubishi Lancer Evolution SE
- 2014 Mitsubishi Lancer Evolution, Limited Edition
- 2011 - 2015 Mitsubishi Lancer GT Sportback, GT, SE Sportback
- 2010 - 2011 Mitsubishi Lancer GTS Sportback, Evolution MR Touring, Ralliart Sportback
- 2015 Mitsubishi Lancer SE Limited Edition Sportback, SE Limited Edition, Evolution Final Edition
- 2010 - 2015 Mitsubishi Lancer SE, Ralliart
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
8 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2008 Mitsubishi Lancer).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Mitsubishi Lancer brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Mitsubishi Lancer.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Rotors · Mitsubishi Parts · Brakes
Questions about Mitsubishi Lancer brake part
Will this fit my Mitsubishi Lancer?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.