PowerStop Power Stop 1998 Chevrolet Tracker Front Autospecialty Brake Kit KOE4919
PowerStop Power Stop 1998 Chevrolet Tracker Front Autospecialty Brake Kit KOE4919
Part number: 1V23P
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Chevrolet TrackerFitment notes & questions
Brake kit by Power Stop, made to fit the 1998 Chevrolet Tracker as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 12 applications for the 1998 Chevrolet Tracker.
Key features
- Power Stop - Front OE Stock Replacement Low-Dust Ceramic Brake Pad and Rotor Kit
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 1998 Chevrolet Tracker
- 1998 Chevrolet Tracker Base, Delux, LSi, Lux
- 1989 - 1997 Geo Tracker Base, LSi
- 1990 - 1993 Suzuki Sidekick Base
- 1989 - 1997 Suzuki Sidekick JA
- 1991 Suzuki Sidekick JL
- 1989 - 1995 Suzuki Sidekick JLX
- 1996 - 1998 Suzuki Sidekick JLX Sport, JX Sport
- 1990 - 1998 Suzuki Sidekick JS
- 1997 - 1998 Suzuki Sidekick JS Sport
- 1989 - 1998 Suzuki Sidekick JX
- 1996 - 1998 Suzuki X-90 Base
- 1998 Suzuki X-90 SE
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
12 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1998 Chevrolet Tracker).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Chevrolet Tracker
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Chevrolet Tracker.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brakes · Chevrolet Parts · Brakes
Questions about Chevrolet Tracker brake part
Will this fit my Chevrolet Tracker?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.