PowerStop Power Stop 15-19 Ford Mustang Front Z23 Evolution Sport Brake Kit K6809
PowerStop Power Stop 15-19 Ford Mustang Front Z23 Evolution Sport Brake Kit K6809
Part number: 1U40W
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford MustangFitment notes & questions
Brake kit by Power Stop, made to fit the 2015–2019 Ford Mustang as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 7 applications for the 2015–2019 Ford Mustang.
Key features
- PSB Z23 Evolution Kit
- Power Stop - Front Z23 Daily Driver Carbon-Fiber Ceramic Brake Pad and Drilled & Slotted Rotor Kit
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 2015–2019 Ford Mustang
- 2015 - 2016 Ford Mustang Base
- 2015 Ford Mustang GT 50 Years Limited Edition
- 2019 - 2020 Ford Mustang GT V8, Bullitt
- 2015 - 2020 Ford Mustang GT, Shelby GT350R, Shelby GT350, EcoBoost, EcoBoost Premium, GT Premium
- 2020 Ford Mustang Shelby GT500
- 2015 - 2017 Ford Mustang V6
- 2017 - 2018 Ford Mustang V8
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
7 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2015–2019 Ford Mustang).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Ford Mustang
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Ford Mustang.
- Model years: 15-19. If your year sits at the edge of the range, check the details above.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brakes · Ford Parts · Brakes
Questions about Ford Mustang brake part
Will this fit my Ford Mustang?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.