PowerStop Power Stop 08-14 Ford E-150 Rear Z17 Evolution Geomet Coated Brake Kit CRK4718
PowerStop Power Stop 08-14 Ford E-150 Rear Z17 Evolution Geomet Coated Brake Kit CRK4718
Part number: 1U4CP
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford E-150Fitment notes & questions
Brake kit from Power Stop, listed for the 2008–2014 Ford E-150. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 5 applications for the 2008–2014 Ford E-150.
Key features
- Power Stop - Rear Genuine Geomet Coated Rotor and Low-Dust Ceramic Brake Pad Kit
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 2008–2014 Ford E-150
- 2008 - 2014 Ford E-150 XL, Base, XLT
- 2008 - 2014 Ford E-250 Base
- 2008 - 2023 Ford E-350 Super Duty Base
- 2008 - 2014 Ford E-350 Super Duty XL, XLT
- 2017 - 2018 Ford E-450 Super Duty Base
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
5 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2008–2014 Ford E-150).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Ford E-150 brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Ford E-150.
- Model years: 08-14. If your year sits at the edge of the range, check the details above.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brakes · Ford Parts · Brakes
Questions about Ford E-150 brake part
Will this fit my Ford E-150?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.