PowerStop Power Stop 06-11 Buick Lucerne Front Autospecialty Brake Rotor AR82110
PowerStop Power Stop 06-11 Buick Lucerne Front Autospecialty Brake Rotor AR82110
Part number: 1V4F0
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Buick LucerneFitment notes & questions
Brake rotor from Power Stop, listed for the 2006–2011 Buick Lucerne. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 10 applications for the 2006–2011 Buick Lucerne.
Key features
- Power Stop Autospecialty brake rotors provide a direct fit solution for original equipment fit and performance
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 2006–2011 Buick Lucerne
- 2006 - 2011 Buick Lucerne CX, CXL
- 2010 Buick Lucerne CXL Special Edition
- 2006 - 2008 Buick Lucerne CXS
- 2008 - 2011 Buick Lucerne Super
- 2008 Chevrolet Impala 50th Anniversary Edition
- 2006 - 2013 Chevrolet Impala LTZ, Police, LS, LT
- 2006 - 2009 Chevrolet Impala SS
- 2014 - 2016 Chevrolet Impala Limited LT, LS, Police, LTZ
- 2006 - 2007 Chevrolet Monte Carlo LT, LS, SS
- 2006 Chevrolet Monte Carlo LTZ
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
10 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2006–2011 Buick Lucerne).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Buick Lucerne brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Buick Lucerne.
- Model years: 06-11. Parts can change mid-generation, so match the exact year.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Buick Parts · Brakes
Questions about Buick Lucerne brake part
Will this fit my Buick Lucerne?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.