PowerStop Power Stop 05-12 Infiniti FX35 Front Z17 Evolution Geomet Coated Brake Kit CRK5264
PowerStop Power Stop 05-12 Infiniti FX35 Front Z17 Evolution Geomet Coated Brake Kit CRK5264
Part number: 1U2W3
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Infiniti FX35Fitment notes & questions
Brake kit by Power Stop, made to fit the 2005–2012 Infiniti FX35 as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 4 applications for the 2005–2012 Infiniti FX35.
Key features
- Power Stop - Front Genuine Geomet Coated Rotor and Low-Dust Ceramic Brake Pad Kit
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 2005–2012 Infiniti FX35
- 2005 - 2012 INFINITI FX35 Base
- 2013 INFINITI FX37 Base, Limited
- 2005 - 2008 INFINITI FX45 Base
- 2014 INFINITI QX70 Base, Seduction
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
4 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2005–2012 Infiniti FX35).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Infiniti FX35 brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Infiniti FX35.
- Model years: 05-12. If your year sits at the edge of the range, check the details above.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Infiniti Parts · Brakes
Questions about Infiniti FX35 brake part
Will this fit my Infiniti FX35?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.