PowerStop Power Stop 00-05 Ford Excursion Rear Right Autospecialty Caliper w/Bracket L4752
PowerStop Power Stop 00-05 Ford Excursion Rear Right Autospecialty Caliper w/Bracket L4752
Part number: 1UUC9
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford ExcursionFitment notes & questions
Caliper from Power Stop, listed for the 2000–2005 Ford Excursion. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 8 applications for the 2000–2005 Ford Excursion.
Key features
- Autospecialty Stock Replacement Brake Caliper
- Rear Right position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear Right
Fitment for the 2000–2005 Ford Excursion
- 2003 - 2005 Ford Excursion Eddie Bauer
- 2004 - 2005 Ford Excursion XLS
- 2000 - 2005 Ford Excursion XLT, Limited
- 2004 Ford F-250 Super Duty Harley-Davidson Edition, King Ranch
- 2000 - 2004 Ford F-250 Super Duty Lariat, XLT, XL
- 2004 Ford F-350 Super Duty Harley-Davidson Edition
- 2003 - 2004 Ford F-350 Super Duty King Ranch
- 2000 - 2004 Ford F-350 Super Duty XLT, Lariat, XL
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear right position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
8 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2000–2005 Ford Excursion).
- Check the position: this part is listed as rear right.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Ford Excursion
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Ford Excursion.
- Model years: 00-05. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Calipers · Ford Parts · Brakes
Questions about Ford Excursion brake part
Will this fit my Ford Excursion?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.