Power Stop 95-99 Toyota Celica Rear Z23 Evolution Sport Brake Kit K3147

Rear Z23 Evolution Sport Brake Kit K3147 from Power Stop, listed for the 1995–1999 Toyota Celica. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 3 applications for the 1995–1999 Toyota Celica.

Key features

• Power Stop - Rear Z23 Daily Driver Carbon-Fiber Ceramic Brake Pad and Drilled & Slotted Rotor Kit
• Rear position

Specifications

• Brand: Power Stop
• Part type: Brake part
• Position: Rear

Fitment for the 1995–1999 Toyota Celica

• 1995 Toyota Celica Base
• 1995 - 1999 Toyota Celica GT
• 1995 - 1997 Toyota Celica ST

Check your year, model, engine and trim against this list before you order.

What it does

Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.

Installation & tips

• Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
• Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
• Hardware: Clips and pins wear with the pads.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
3 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (1995–1999 Toyota Celica).
• Check the position: this part is listed as rear.
• Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.