Power Stop 95-00 Ford Contour Front Z17 Evolution Ceramic Brake Pads w/Hardware 17-648
Power Stop 95-00 Ford Contour Front Z17 Evolution Ceramic Brake Pads w/Hardware 17-648
Part number: 1W8B2
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford ContourFitment notes & questions
Front Z17 Evolution Ceramic Brake Pads w/Hardware from Power Stop, listed for the 1995–2000 Ford Contour. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 10 applications for the 1995–2000 Ford Contour.
Key features
- Power Stop - Front Z17 Low-Dust Ceramic Brake Pads with Hardware
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 1995–2000 Ford Contour
- 1996 - 2000 Ford Contour Base, Power
- 1995 - 1998 Ford Contour GL
- 1995 Ford Contour GL Sport, LX Sport
- 1995 - 2000 Ford Contour SE, LX
- 1996 - 1998 Ford Contour Sport
- 1998 - 2000 Ford Contour SVT
- 1999 - 2002 Mercury Cougar Base, V6
- 2001 Mercury Cougar S
- 1995 Mercury Mystique LS Young America, Base, GS Spree
- 1995 - 2000 Mercury Mystique LS, GS
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
10 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1995–2000 Ford Contour).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Ford Contour brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Ford Contour.
- Model years: 95-00. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Ford Parts · Brakes
Questions about Ford Contour brake part
Will this fit my Ford Contour?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.