Power Stop 94-01 Ford Mustang Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-627A
Power Stop 94-01 Ford Mustang Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-627A
Part number: 1W89Q
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford MustangFitment notes & questions
Rear Z17 Evolution Ceramic Brake Pads w/Hardware from Power Stop, listed for the 1994–2001 Ford Mustang. Brake parts are usually replaced per axle, left and right together, so the car stops straight. The fitment section lists 12 applications for the 1994–2001 Ford Mustang.
Key features
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 1994–2001 Ford Mustang
- 1997 Ford Mustang Cobra
- 1994 Ford Mustang Convertible
- 1998 - 2003 Ford Mustang Equipado
- 2004 Ford Mustang GT Base, GT Equipado
- 2001 Ford Mustang GT Bullitt
- 1994 - 2004 Ford Mustang GT, Base, SVT Cobra
- 1995 Ford Mustang GTS
- 1996 - 1997 Ford Mustang High
- 2003 - 2004 Ford Mustang Mach 1
- 1998 Ford Mustang Semi-Equipado
- 2003 Ford Mustang SVT Cobra 10th Anniversary
- 1995 - 2000 Ford Mustang SVT Cobra R
Check your year, model, engine and trim against this list before you order.
What it does
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
12 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1994–2001 Ford Mustang).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Ford Mustang brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Ford Mustang.
- Model years: 94-01. If your year sits at the edge of the range, check the details above.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Ford Parts · Brakes
Questions about Ford Mustang brake part
Will this fit my Ford Mustang?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.