Power Stop 88-92 Audi 80 Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-228
Power Stop 88-92 Audi 80 Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-228
Part number: 1W85J
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Audi 80Fitment notes & questions
Power Stop Rear Z17 Evolution Ceramic Brake Pads w/Hardware for the 1988–1992 Audi 80. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 39 applications for the 1988–1992 Audi 80.
Key features
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 1988–1992 Audi 80
- 1989 - 1993 Audi 100 Base
- 1992 - 1994 Audi 100 CS, S
- 1989 Audi 100 E
- 1989 - 1991 Audi 100 Quattro Base
- 1992 - 1994 Audi 100 Quattro CS
- 1989 - 1991 Audi 200 Base
- 1991 Audi 200 Quattro 20v, Avant, 20v Avant
- 1989 - 1991 Audi 200 Quattro Base
- 1986 - 1987 Audi 4000 Quattro CS
- 1984 - 1987 Audi 4000 Quattro S
- 1986 - 1988 Audi 5000 CS
- 1985 Audi 5000 CS Turbo
- 1980 - 1988 Audi 5000 S
- 1980 - 1985 Audi 5000 S Turbo, Base
- 1986 - 1988 Audi 5000 Quattro CS
- 1987 - 1988 Audi 5000 Quattro S
- 1988 - 1992 Audi 80 Base
- 1988 - 1992 Audi 80 Quattro Base
- 1988 - 1995 Audi 90 Base
- 1993 - 1994 Audi 90 CS, S
- 1995 Audi 90 Sport
- 1990 - 1991 Audi 90 Quattro 20v
- 1988 - 1995 Audi 90 Quattro Base
- 1993 - 1994 Audi 90 Quattro CS
- 1995 Audi 90 Quattro Sport
- 1996 - 1997 Audi A4 Base
- 1998 - 1999 Audi A4 Quattro Avant
- 1996 - 1999 Audi A4 Quattro Base
- 1995 - 1997 Audi A6 Base, Avant
- 1995 - 1998 Audi A6 Quattro Avant, Base
- 1997 - 1999 Audi A8 Base
- 1997 - 1999 Audi A8 Quattro Base
- 1982 - 1983 Audi Coupe Base
- 1987 Audi Coupe GT
- 1983 - 1985 Audi Quattro Base
- 1992 - 1994 Audi S4 Base
- 1995 Audi S6 Avant
- 1995 - 1996 Audi S6 Base
- 1990 - 1994 Audi V8 Quattro Base
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
39 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1988–1992 Audi 80).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

About this brake part for the Audi 80
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Audi 80.
- Model years: 88-92. If your year sits at the edge of the range, check the details above.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Audi Parts · Brakes
Questions about Audi 80 brake part
Will this fit my Audi 80?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.