Power Stop 10-12 Land Rover Range Rover Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1427
Power Stop 10-12 Land Rover Range Rover Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1427
Part number: 1W7V7
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Land Rover Range RoverFitment notes & questions
Power Stop Rear Z17 Evolution Ceramic Brake Pads w/Hardware for the 2010–2012 Land Rover Range Rover. Brake parts are usually replaced per axle, left and right together, so the car stops straight. The fitment section lists 7 applications for the 2010–2012 Land Rover Range Rover.
Key features
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 2010–2012 Land Rover Range Rover
- 2011 - 2012 Land Rover Range Rover Autobiography
- 2010 - 2012 Land Rover Range Rover Base, HSE, Supercharged
- 2012 Land Rover Range Rover HSE Lux
- 2011 - 2013 Land Rover Range Rover Sport Autobiography, GT Limited Edition
- 2010 - 2013 Land Rover Range Rover Sport Base, Supercharged, HSE
- 2012 Land Rover Range Rover Sport GT Limited Edition 3
- 2012 - 2013 Land Rover Range Rover Sport HSE Lux
Check your year, model, engine and trim against this list before you order.
What it does
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
7 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2010–2012 Land Rover Range Rover).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Brake part for the Land Rover Range Rover: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: Land Rover Range Rover.
- Model years: 10-12. Parts can change mid-generation, so match the exact year.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Land Rover Parts · Brakes
Questions about Land Rover Range Rover brake part
Will this fit my Land Rover Range Rover?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.