Power Stop 08-12 Land Rover LR2 Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1314
Power Stop 08-12 Land Rover LR2 Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1314
Part number: 1W7RP
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Land Rover LR2Fitment notes & questions
Rear Z17 Evolution Ceramic Brake Pads w/Hardware from Power Stop, listed for the 2008–2012 Land Rover LR2. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 10 applications for the 2008–2012 Land Rover LR2.
Key features
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 2008–2012 Land Rover LR2
- 2011 - 2012 Land Rover LR2 HSE Lux, Base
- 2008 - 2012 Land Rover LR2 HSE, HSE Premium, SE
- 2008 Land Rover LR2 SE Premium
- 2007 - 2014 Volvo S80 3.2
- 2010 - 2013 Volvo S80 Base
- 2013 Volvo S80 Evolution
- 2011 Volvo S80 Kinetic, Addition
- 2014 Volvo S80 Luxury
- 2008 - 2014 Volvo S80 T6
- 2007 - 2010 Volvo S80 V8
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
10 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2008–2012 Land Rover LR2).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Land Rover LR2 brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Land Rover LR2.
- Model years: 08-12. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Land Rover Parts · Brakes
Questions about Land Rover LR2 brake part
Will this fit my Land Rover LR2?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.