Power Stop 07-10 Ford Edge Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1259
Power Stop 07-10 Ford Edge Rear Z17 Evolution Ceramic Brake Pads w/Hardware 17-1259
Part number: 1W7QH
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford EdgeFitment notes & questions
Rear Z17 Evolution Ceramic Brake Pads w/Hardware by Power Stop, made to fit the 2007–2010 Ford Edge as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 10 applications for the 2007–2010 Ford Edge.
Key features
- Power Stop - Rear Z17 Low-Dust Ceramic Brake Pads with Hardware
- Rear position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Rear
Fitment for the 2007–2010 Ford Edge
- 2008 - 2010 Ford Edge Limited
- 2007 - 2010 Ford Edge SE, SEL
- 2007 Ford Edge SEL Plus
- 2009 - 2010 Ford Edge Sport
- 2007 - 2010 Lincoln MKX Base, Premium
- 2008 - 2012 Mazda CX-7 GT, GS
- 2010 - 2012 Mazda CX-7 SV, GX
- 2007 - 2012 Mazda CX-7 Touring, Grand Touring, Sport
- 2008 - 2015 Mazda CX-9 GS, GT
- 2007 - 2015 Mazda CX-9 Sport, Touring, Grand Touring
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
10 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2007–2010 Ford Edge).
- Check the position: this part is listed as rear.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Before you order: Ford Edge brake part fitment
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set.
Fitment notes
- Listed for: Ford Edge.
- Model years: 07-10. Parts can change mid-generation, so match the exact year.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Ford Parts · Brakes
Questions about Ford Edge brake part
Will this fit my Ford Edge?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.