Power Stop 04-08 Chrysler Crossfire Front Z16 Evolution Ceramic Brake Pads 16-740
Power Stop 04-08 Chrysler Crossfire Front Z16 Evolution Ceramic Brake Pads 16-740
Part number: 1W7E8
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Chrysler CrossfireFitment notes & questions
Front Z16 Evolution Ceramic Brake Pads by Power Stop, made to fit the 2004–2008 Chrysler Crossfire as listed below. Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. The fitment section lists 14 applications for the 2004–2008 Chrysler Crossfire.
Key features
- Front position
Specifications
- Brand: Power Stop
- Part type: Brake part
- Position: Front
Fitment for the 2004–2008 Chrysler Crossfire
- 2004 - 2007 Chrysler Crossfire Base
- 2005 - 2008 Chrysler Crossfire Limited
- 2005 - 2006 Chrysler Crossfire SRT-6
- 1998 - 2003 Mercedes-Benz CLK320 Base
- 1999 - 2003 Mercedes-Benz CLK430 Base
- 2008 - 2009 Mercedes-Benz E300 4Matic
- 1998 - 2005 Mercedes-Benz E320 4Matic
- 1996 - 2005 Mercedes-Benz E320 Base
- 2005 Mercedes-Benz E320 CDI
- 2006 - 2009 Mercedes-Benz E350 Elegance, Sport, 4Matic, Base
- 1997 Mercedes-Benz E420 Avantgarde, Base
- 2000 - 2002 Mercedes-Benz E430 4Matic
- 1998 - 2002 Mercedes-Benz E430 Base
- 2001 - 2004 Mercedes-Benz SLK320 Base
Check your year, model, engine and trim against this list before you order.
What it does
Brake parts are usually replaced per axle, left and right together, so the car stops straight. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
14 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2004–2008 Chrysler Crossfire).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

About this brake part for the Chrysler Crossfire
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Chrysler Crossfire.
- Model years: 04-08. Check your car's year falls inside this range.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Chrysler Parts · Brakes
Questions about Chrysler Crossfire brake part
Will this fit my Chrysler Crossfire?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.