• DNJ Piston and Ring Set 2008-2011 Honda 2.4L
  • DNJ Piston and Ring Set 2008-2011 Honda 2.4L
1 2

DNJ

DNJ Piston and Ring Set 2008-2011 Honda 2.4L

DNJ Piston and Ring Set 2008-2011 Honda 2.4L

$201.99 USD
$319.18 USD $201.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: 2008–2011 HondaFitment notes & questions

Piston and Ring Set from DNJ, listed for 2008–2011 Honda 2 with the 2.4L engine. Worn rings show up as oil burning, blow-by and low compression.

Quick facts

  • Brand: DNJ
  • Part type: Piston
  • Listed for: 2008–2011 Honda 2
  • Engine: 2.4L
  • Engine code: Set Services Complete Engine, 1.2x1.2x2.0.
  • Part number: PRK229C

Specifications

  • Includes: Piston Set x1 Piston Ring Set x1.

Good to know

  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Check ring end gaps in the bore before installation and stagger the gaps.

View full details

Before you order: Honda piston fitment

Pistons and rings seal the combustion chamber and turn pressure into motion.

Fitment notes

  • Listed for: 2008–2011 Honda.
  • Model years: 2008–2011. If your year sits at the edge of the range, check the details above.
  • Engine: check the engine size listed against your vehicle's VIN or under-hood label.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.

Ask about fitment

Plan the whole job

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Honda Parts · All Pistons · Engine

Questions about Honda pistons

Will this fit my Honda?
It is listed for the 2008–2011 Honda. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.
More parts for this car
Honda PartsEngineAll DNJ