Oil Pump Puller Tool [Bus/Vanagon]
Oil Pump Puller Tool [Bus/Vanagon]
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
This inexpensive aftermarket VW201 tool makes pulling your old oil pump and installing our High-Volume Oil Pump a breeze.
Works with:
• Bus up to and including 1971 with T1 engine
• Vanagon 1983-91 with waterboxer engine
Does not work on:
• 1972-79 Bus
• 1980-83 Vanagon with aircooled engine
Basic directions for use: Remove pump cover and gears. Insert "T" end of the threaded component into the pump. Rotate the "T" end until it grabs the pump body. Position "U" brace against engine block. Slowly and carefully tighten the nut to extract the pump. Caution: The pump body can seize to the block and may damage the puller tool. The application of heat to the pump body and engine block may be necessary.
![Oil Pump Puller Tool [Bus/Vanagon]](http://partotter.com/cdn/shop/files/OIL-PULLER-TOOL1_ff5ed569-9bcf-4f73-b8f2-2b7f5c75bd4e.jpg?v=1793150768&width=1445)
About this oil pump
Oil pumps are usually replaced during an engine rebuild or when pressure drops, together with the pickup screen.
Fitment notes
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.
Ask about fitmentParts that usually go with it
- Oil pan gasket. The pan usually comes off for this job.
- Oil and filter. Start fresh after the job.
More for your car: Tools & garage · All Oil Pumps · Engine