NGK Spark Plug

NGK Spark Plug. Key specs: thread size 10 mm, thread pitch 1.0 mm and hex size 5/8" (16 mm). Ignition parts are routine maintenance and among the easiest ways to restore smooth running.

Key features

• Corrugated Ribs Prevent Flashover
• Copper Core Aids in Heat Removal
• Triple Seals Prevent Leakage
• Threaded Terminal Stud
• Corrugated Ribs
• Triple-Gasket Sealing Process
• Copper Core
• Thread Size: 10mm

Specifications

• Brand: NGK
• Part type: Ignition part
• Thread Size: 10 mm
• Thread Pitch: 1.0 mm
• Resistor Value: 5K Ohm
• Reach: 12.7 mm (1/2")
• Hex Size: 5/8" (16 mm)
• Terminal Type: Threaded Stud
• Overall Height: ISO
• Gap: 028" (0.7 mm)

Fitment

This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.

What it does

Worn plugs, cracked wires and weak coils cause misfires, rough running and poor economy. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.

Installation & tips

• Set the spark plug gap to your engine spec and do not over-torque plugs in aluminum heads.
• Plug wires or boots: Old wires and boots crack.
• Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.

FAQ

What size is it?
Thread Size: 10 mm; Thread Pitch: 1.0 mm; Hex Size: 5/8" (16 mm).

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Measure the part you are replacing and compare it with the specifications above.