Moroso
Moroso Water Pump, Bb Mopar Electric
Moroso Water Pump, Bb Mopar Electric
Part number: 0B2ED
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Water Pump, Bb Mopar Electric by Moroso. Highlights include compatible with 12 and 16 volt systems and high-temperature Viton® seal eliminates leaks. On many engines the water pump sits behind the timing belt, so the two are often replaced together.
Key features
- Each Pump plate has been re-profiled and pocketed to remove unecessary weight
- Average overall pump heights have been shortened by 3/4" and up to 2 lbs weight reduction on average per pump
- Mounts directly to stock water pump location, includes stainless steel mounting hardware & gasket for simple installation
- Compatible with 12 and 16 volt systems
- High-temperature Viton® seal eliminates leaks
- Pumps can easily accommodate lower radiator hose from either driver or passenger side installations
- Clear anodized 6061-T6 billet aluminum pump housing, impeller, pump plate and motor cap along with powder-coated outer case will provide years of dependable operation
- Draws normally with 12V (8-10 amps in a typical system), allowing the battery to remain more fully charged during racing without an alternator
Specifications
- Brand: Moroso
- Part type: Water pump
Fitment
This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.
What it does
Pumps wear at the bearing and seal. A leak from the weep hole or a growling noise usually means it is time. A healthy cooling system keeps the engine at its working temperature; most cooling parts are replaced because of leaks, corrosion or a failed bearing or seal.
Installation & tips
- Flush the old coolant and refill with the type your engine specifies, then bleed air out of the system.
- Thermostat: Cheap to replace while the system is drained.
- Coolant: Refill with the correct type.
- Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.
FAQ
Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Measure the part you are replacing and compare it with the specifications above.

About this water pump
On many engines the water pump sits behind the timing belt, so the two are often replaced together.
Fitment notes
- Specs, lead time and warranty come from Moroso and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Thermostat. Cheap to replace while the system is drained.
- Coolant. Refill with the correct type.
- Timing belt. If the belt drives the pump, do both together.
More for your car: Water Pumps · All Water Pumps · Cooling & heating
Questions about water pump
Will this fit my car?
What are signs of a failing water pump?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.