Moog
Moog Tie Rod End
Moog Tie Rod End
Part number: 3TYG5
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Moog Tie Rod End. Key specs: rod thread M14X1.5, stud thread M12X1.25 and rack end thread M12X1.25. Steering parts connect the steering wheel to the front wheels. The fitment section lists 8 applications.
Key features
- Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Greasable: Yes
- Stud Center to End (in): 5.780
- Rod Thread: M14X1.5
- Configuration: STRAIGHT
- Rod Type (Male / Female): FEMALE
- Stud Diameter Dimension (top in.): 0.486
Specifications
- Brand: Moog
- Part type: Steering part
- Rod Thread: M14X1.5
- Configuration: STRAIGHT
- Rod Type (Male / Female): FEMALE
- Stud Thread: M12X1.25
- Rack End Thread: M12X1.25
- Specification Image Reference: OUTERTIEROD.tif
- End 1 Thread Pitch (MM): 1.5
- End 1 Thread Direction: Clockwise
Fitment
- 1995 - 2005 Chevrolet Cavalier Base, LS
- 2002 - 2005 Chevrolet Cavalier LS Sport
- 1997 - 1999 Chevrolet Cavalier RS
- 1995 - 2002 Chevrolet Cavalier Z24
- 1997 - 2005 Pontiac Sunfire Base
- 1995 - 2003 Pontiac Sunfire GT
- 2000 Pontiac Sunfire GT Milenio
- 1995 - 2004 Pontiac Sunfire SE
OE and interchange numbers
5.780, 0.486, 0.593, 14.0, 12.0, 1.25
What it does
Any steering part change affects toe, so alignment follows. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.
Installation & tips
- Count the turns when removing tie rod ends to get close, then have the alignment set.
- Alignment: Needed after steering work.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
What size is it?
Rod Thread: M14X1.5; Stud Thread: M12X1.25; Rack End Thread: M12X1.25.
How many vehicles is it listed for?
8 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Measure the part you are replacing and compare it with the specifications above.
- Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.

About this steering part
Any steering part change affects toe, so alignment follows.
Fitment notes
- Specs, lead time and warranty come from Moog and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Alignment. Needed after steering work.
More for your car: Tie Rods & Tie Rod Ends · Suspension & steering
Questions about steering part
Will this fit my car?
Will I need an alignment?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.