Moog
Moog Tie Rod End
Moog Tie Rod End
Part number: 1K4DJ
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Moog Tie Rod End. Key specs: rod thread M17X1.5, stud thread M10X1.25 and rack end thread M10X1.25. Steering parts connect the steering wheel to the front wheels. The fitment section lists 14 applications.
Key features
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Greasable
- Dust Boot Included
Specifications
- Brand: Moog
- Part type: Steering part
- Rod Thread: M17X1.5
- Configuration: Straight
- Rod Type (Male / Female): Female
- Stud Thread: M10X1.25
- Rack End Thread: M10X1.25
- End 1 Thread Pitch (MM): 1.5
- End 1 Thread Direction: Clockwise
Fitment
- 1999 - 2004 Chrysler 300M Base
- 2003 Chrysler 300M Pro-Am
- 2002 - 2004 Chrysler 300M Special
- 2002 - 2004 Chrysler Concorde Limited
- 1998 - 2004 Chrysler Concorde LXi, LX
- 1998 - 2004 Chrysler Intrepid Base
- 2003 Chrysler Intrepid ES
- 2003 - 2004 Chrysler Intrepid SE
- 1999 - 2001 Chrysler LHS Base
- 1998 - 2000 Dodge Intrepid ES Lujo, Base
- 1998 - 2004 Dodge Intrepid ES, SXT
- 2004 Dodge Intrepid Police
- 2000 - 2002 Dodge Intrepid R/T
- 2001 - 2004 Dodge Intrepid SE
OE and interchange numbers
5.360, 0.464, 0.583, 17.0, 10.0, 1.25
What it does
Any steering part change affects toe, so alignment follows. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.
Installation & tips
- Count the turns when removing tie rod ends to get close, then have the alignment set.
- Alignment: Needed after steering work.
- Put the new part next to the old one and compare the shape, mounting points and connections before you install it.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
What size is it?
Rod Thread: M17X1.5; Stud Thread: M10X1.25; Rack End Thread: M10X1.25.
How many vehicles is it listed for?
14 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Measure the part you are replacing and compare it with the specifications above.
- Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.

Before you order: fitment and what to plan
Steering parts connect the steering wheel to the front wheels.
Fitment notes
- Specs, lead time and warranty come from Moog and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentPlan the whole job
- Alignment. Needed after steering work.
More for your car: Tie Rods & Tie Rod Ends · Suspension & steering
Questions about steering part
Will this fit my car?
Will I need an alignment?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.