• MaxTrac 07-18 GM C1500 2WD Front Sensor Spacers for Magneride Models 8317MR
1 1

MaxTrac

MaxTrac 07-18 GM C1500 2WD Front Sensor Spacers for Magneride Models 8317MR

MaxTrac 07-18 GM C1500 2WD Front Sensor Spacers for Magneride Models 8317MR

Part number: 1RGPF

$21.81 USD
$21.81 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Magneride Models 8317MRFitment notes & questions

GM C1500 2WD Front Sensor Spacers for Magneride Models from MaxTrac (front). Sensors tell the engine computer what is happening so it can adjust fuel, timing and gauges.

Key features

  • Front position

Specifications

  • Brand: MaxTrac
  • Part type: Sensor
  • Position: Front
  • Model years: 2007–2018

Fitment

  • 2014 - 2018 GMC Sierra 1500 SLE, Denali, SLT, Base

What it does

Reading the trouble code first points you to the right sensor. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.

Installation & tips

  • Read the code, check the wiring and connector, and clear codes after the new sensor is in.
  • Connector and wiring: Corroded connectors mimic a bad sensor.
  • Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

  • Check the position: this part is listed as front.
  • Measure the part you are replacing and compare it with the specifications above.
View full details

MaxTrac sensor for the Magneride Models 8317MR: what to know

A failed sensor usually sets a check-engine code and can cause poor running or wrong readings.

Fitment notes

  • Listed for: Magneride Models 8317MR.
  • Specs, lead time and warranty come from MaxTrac and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

What else to plan for

More for your car: Batteries & electrical · Batteries & electrical

Questions about Magneride Models 8317MR sensor

Will this fit my Magneride Models 8317MR?
It is listed for the Magneride Models 8317MR. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Will a new sensor clear my check-engine light?
If the sensor was the cause, the light usually goes off after codes are cleared or after a few drive cycles.
Where do specs and warranty details come from?
From MaxTrac. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Batteries & electrical