Karcher Compatible Snow Foam Lance Kit | Foam Cannon with Quick Connector

Karcher Compatible Snow Foam Lance Kit | Foam Cannon with Quick Connector. Key specs: material Aluminum, capacity 1000 milliliters / 32 ounces and maximum water temperature 60°C / 140°F. Replacing a switch, relay or harness is usually a plug-in job once you find the fault.

Key features

• Adjustable Spray Pattern — Switch between vertical and horizontal spray, with the fan angle set from 0 degrees pencil jet to 60 degrees wide fan
• Dual Nozzle Set — A 1.15mm standard nozzle suits 800-1850 PSI pressure washers, and a 1.25mm brass nozzle suits 1850-4000 PSI machines
• Measured 1-Liter Bottle — The 1-liter bottle has measurement marks and a large opening for mixing and filling
• Mix car shampoo and water at a 1:5 ratio in the 1-liter bottle, using the measurement marks to measure each
• Hold the water gun by its finger grip handle while spraying the foam

Specifications

• Part type: Electrical part
• Material: Aluminum
• Handle Type: Finger Grip
• Interface: M14
• Capacity: 1000 milliliters / 32 ounces
• Required Pressure: 800-1850 PSI
• Maximum Pressure: 280 bar / 4000 PSI
• Maximum Water Temperature: 60°C / 140°F
• Foam Spray Distance: Up to 6m / 20ft
• Standard Nozzle: 1.15 mm
• Brass Nozzle: 1.25 mm

Options

• Color: B, A

Fitment

This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.

What it does

Many electrical faults are a bad connection rather than a failed part, so check grounds and connectors first. Electrical faults often show up as warning lights, rough running or no-start problems, and the right replacement part clears the cause rather than the symptom.

Installation & tips

• Disconnect the battery before electrical work and check grounds first.
• Fuses and relays: Cheap to keep spares.
• Disconnect the battery before you unplug or splice any wiring, and test everything works before you refit trim panels.

FAQ

What is the electrical part made of?
The listing gives the material as aluminum.

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Measure the part you are replacing and compare it with the specifications above.