• DNJ Intake Valve 1988-1997 Ford 1.3L
  • DNJ Intake Valve 1988-1997 Ford 1.3L
1 2

DNJ

DNJ Intake Valve 1988-1997 Ford 1.3L

DNJ Intake Valve 1988-1997 Ford 1.3L

Part number: IV415

$8.99 USD
$8.99 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: 1988–1997 FordFitment notes & questions

Intake Valve from DNJ, listed for 1988–1997 Ford 1 with the 1.3L engine. Intake valves let the air and fuel mixture into the cylinder; exhaust valves let the burned gases out.

Quick facts

  • Brand: DNJ
  • Part type: Valve
  • Listed for: 1988–1997 Ford 1
  • Engine: 1.3L
  • Engine code: VIN K 8V SOHC
  • Part number: IV415

Listed fitment

  • [1988-1997] FORD [Nitride Coated; 1 Groove; 32mm Head Dia.; 7mm Stem Dia.; 105.3mm O.A.L.] / L4 / 1.3L SOHC 8V

Good to know

  • Notes: Nitride Coated; 1 Groove; 32mm Head Dia.; 7mm Stem Dia.; 105.3mm O.A.L.; Intake
  • Warranty terms: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.

Tip: Have the valve seats cut or lapped so the new valves seal fully.

View full details

DNJ engine valves for the Ford: what to know

Burned or bent valves cause misfires and low compression. Guides that wear let valves wobble and burn oil.

Fitment notes

  • Listed for: 1988–1997 Ford.
  • Model years: 1988–1997. Check your car's year falls inside this range.
  • Engine: match the engine size and code to your vehicle; the same model often came with several engines.
  • Specs, lead time and warranty come from DNJ and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

What else to plan for

More for your car: Ford Intake Valves · Ford Parts · All Intake Valves · Engine

Questions about Ford engine valves

Will this fit my Ford?
It is listed for the 1988–1997 Ford. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
How do I know a valve is bad?
A compression or leak-down test shows whether a cylinder is losing pressure past a valve.
Where do specs and warranty details come from?
From DNJ. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Ford Intake ValvesIntake ValvesFord PartsAll DNJ