Hellwig 17- Tesla Model 3 Rear Sway Bar 7906

17- Rear Sway Bar 7906 from Hellwig, listed for the Tesla Model 3. Worn end links and bushings cause clunks over bumps.

Key features

• Sway Bar - Rear - 0.875 in Diameter - Chromoly - Gray Powder Coat - Telsa 3 2017-23 - Each
• Rear position

Specifications

• Brand: Hellwig
• Part type: Sway bar part
• Position: Rear

Fitment for the Tesla Model 3

Listed for the Tesla Model 3, rear position. Check your year, model and trim against the title before you order.

What it does

Bigger or stiffer bars make the car corner flatter and change its balance front to rear. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.

Installation & tips

• Fit new end links and bushings with a new bar, and tighten links with the car at ride height.
• End links: Worn links clunk.
• Bushings: Fresh bushings stop squeaks.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (Tesla Model 3).
• Check the position: this part is listed as rear.
• Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.