Hawk Performance-High Street 5.0 Front Brake Pads

Hawk Performance-High Street 5.0 Front Brake Pads, front. Highlights include pushing the Limits of ABS and decreased stopping distances. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 6 applications.

Key features

• Pushing the Limits of ABS
• Decreased stopping distances
• Improved pedal feel from initial pressure through entire pedal stroke
• Minimal fade under Higher Temps
• Gentle on rotors
• Very quiet, low noise
• Improved braking over OE pads
• Extended pad life

Specifications

• Brand: Hawk
• Part type: Brake part
• Position: Front

Fitment

• 2014 Porsche 911 50th Anniversary Edition
• 2016 Porsche 911 Carrera 4 Black Edition, Targa 4 GTS, Carrera Black Edition, Black Edition, GTS, GT3 RS
• 2012 - 2016 Porsche 911 Carrera 4S, Carrera, Carrera 4 GTS, Turbo, Carrera S, Turbo S, Carrera 4, Targa 4S, Carrera GTS, Targa 4
• 2014 - 2016 Porsche 911 GT3
• 2015 - 2016 Porsche 911 Targa S, Targa
• 2016 Porsche Boxster Spyder, Black Edition, Base, GTS, S

What it does

Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.

Installation & tips

• Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
• Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
• Hardware: Clips and pins wear with the pads.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
6 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Check the position: this part is listed as front.
• Measure the part you are replacing and compare it with the specifications above.
• Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.