Hawk HP Plus Brake Pads Front Ford Mustang GT 1999-2004

Hawk HP Plus Brake Pads Front for the 1999–2004 Ford Mustang GT. Highlights include high Friction Pad and very Resistant to Brake Fade. Brake parts are usually replaced per axle, left and right together, so the car stops straight. The fitment section lists 7 applications for the 1999–2004 Ford Mustang GT.

Key features

• High Friction Pad
• Very Resistant to Brake Fade
• Longer Lasting Pad than Competitive Pad Materials
• HP Plus Brake Pads FMSI ID, D804
• Position: Front

Specifications

• Brand: Hawk
• Part type: Brake part
• Position: Front

Fitment for the 1999–2004 Ford Mustang GT

• 1999 - 2004 Ford Mustang Base, SVT Cobra, GT
• 1999 - 2003 Ford Mustang Equipado
• 2004 Ford Mustang GT Base, GT Equipado
• 2001 Ford Mustang GT Bullitt
• 2003 - 2004 Ford Mustang Mach 1
• 2003 Ford Mustang SVT Cobra 10th Anniversary
• 2000 Ford Mustang SVT Cobra R

Check your year, model, engine and trim against this list before you order.

What it does

Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.

Installation & tips

• Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
• Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
• Hardware: Clips and pins wear with the pads.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

How many vehicles is it listed for?
7 applications are listed in the fitment section above.

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

Before you order

• Confirm your year, make, model and trim match the fitment listed above (1999–2004 Ford Mustang GT).
• Check the position: this part is listed as front.
• Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.

Good to know

• Warranty: Limited Lifetime Hawk Warranty