Hawk DTC-60 Brake Pads Front Ford Mustang Shelby GT 2007-2008
Hawk DTC-60 Brake Pads Front Ford Mustang Shelby GT 2007-2008
Part number: 0D3L6
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford Mustang ShelbyFitment notes & questions
Hawk DTC-60 Brake Pads Front for the 2007–2008 Ford Mustang Shelby. Highlights include 400-1600°F Operating Temperatures and aggressive Initial Bite. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 11 applications for the 2007–2008 Ford Mustang Shelby.
Key features
- 400-1600°F Operating Temperatures
- Aggressive Initial Bite
- Lower Friction Pad than DTC-70 Pads
- Better Brake Pad and Rotor Wear
- Provides High Deceleration Rate
- Excellent Torque Controllability
- DTC-60 Brake Pads FMSI ID, D1081
- Position: Front
Specifications
- Brand: Hawk
- Part type: Brake part
- Position: Front
Fitment for the 2007–2008 Ford Mustang Shelby
- 2005 - 2006 Ford GT Base
- 2005 - 2014 Ford Mustang Base, GT
- 2012 - 2013 Ford Mustang Boss 302
- 2008 - 2009 Ford Mustang Bullitt, Shelby GT500KR
- 2005 - 2008 Ford Mustang GT Base
- 2005 - 2009 Ford Mustang GT Equipado
- 2007 - 2009 Ford Mustang Lujo
- 2008 - 2014 Ford Mustang Shelby
- 2007 - 2008 Ford Mustang Shelby GT
- 2007 - 2014 Ford Mustang Shelby GT500
- 2012 - 2014 Ford Mustang ST
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
11 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (2007–2008 Ford Mustang Shelby).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
Brake part for the Ford Mustang Shelby: what to know
Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention.
Fitment notes
- Listed for: Ford Mustang Shelby.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentWhat else to plan for
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Ford Parts · Brakes
Questions about Ford Mustang Shelby brake part
Will this fit my Ford Mustang Shelby?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.