Hawk Disc Brake Pad
Hawk Disc Brake Pad
Part number: 0JY1Z
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Disc Brake Pad from Hawk. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 15 applications.
Specifications
- Brand: Hawk
- Part type: Brake part
Fitment
- 1992 - 1998 BMW 318i Base
- 1992 - 1997 BMW 318is Base
- 1995 - 1999 BMW 318ti Base
- 2001 - 2006 BMW 325Ci Base
- 1992 - 2003 BMW 325i Base
- 1992 - 1995 BMW 325is Base
- 2001 - 2005 BMW 325xi Base
- 2000 BMW 328Ci Base
- 1998 - 1999 BMW 328i Base
- 1998 - 1999 BMW 328is Base
- 1998 - 1999 BMW Z3 1.9i, M Roadster
- 1997 - 1999 BMW Z3 2.8i
- 1996 - 1997 BMW Z3 Base
- 1999 BMW Z3 M Coupe, Coupe
- 1996 - 1999 BMW Z3 Roadster
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
How many vehicles is it listed for?
15 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.
Before you order
- Measure the part you are replacing and compare it with the specifications above.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Message us your vehicle details and we'll double-check fitment before you buy.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Brakes
Questions about brake part
Will this fit my car?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.