Hawk Ceramic Brake Pads Front Ford Mustang GTS 1995-1995
Hawk Ceramic Brake Pads Front Ford Mustang GTS 1995-1995
Part number: 005FV
Couldn't load pickup availability
- Ships direct from the brand or supplier
- Tracking emailed when it ships
- Free fitment check before you order
Listed for: Ford Mustang GTSFitment notes & questions
Hawk Ceramic Brake Pads Front for the 1995 Ford Mustang GTS. Highlights include up to 32% More Braking Power and quiet Operation. Squealing, grinding, a pulsing pedal or a long stopping distance all mean the brakes need attention. The fitment section lists 11 applications for the 1995 Ford Mustang GTS.
Key features
- Recommended Use: Performance Street Driving, & Low Dust Applications
- Up to 32% More Braking Power
- Quiet Operation
- Consistent Friction Output
- Promotes Longer Pad and Rotor Life
- Perf Ceramic Brake Pads FMSI ID, D600
- Position: Front
- Recommended Use
Specifications
- Brand: Hawk
- Part type: Brake part
- Position: Front
Fitment for the 1995 Ford Mustang GTS
- 1997 Ford Mustang Cobra
- 1994 Ford Mustang Convertible
- 1998 Ford Mustang Equipado, Semi-Equipado
- 1994 - 1998 Ford Mustang GT, SVT Cobra, Base
- 1995 Ford Mustang GTS, SVT Cobra R
- 1996 - 1997 Ford Mustang High
- 1995 - 1996 Ford Thunderbird Base
- 1993 - 1997 Ford Thunderbird LX
- 1993 - 1995 Ford Thunderbird Super Coupe
- 1993 - 1994 Ford Thunderbird V8
- 1993 - 1997 Mercury Cougar XR-7
Check your year, model, engine and trim against this list before you order.
What it does
Brakes turn speed into heat. Pads, rotors and calipers work together, so their condition matters as a set. Brakes are the most important safety system on the car; replacing worn parts restores stopping power and pedal feel, and upgraded parts handle heat better.
Installation & tips
- Bed in new pads and rotors following the brand instructions, and bleed the brakes if the system was opened.
- Brake fluid: Old fluid absorbs water; flush it when you do a brake job.
- Hardware: Clips and pins wear with the pads.
- This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.
FAQ
Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.
How many vehicles is it listed for?
11 applications are listed in the fitment section above.
Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.
Before you order
- Confirm your year, make, model and trim match the fitment listed above (1995 Ford Mustang GTS).
- Check the position: this part is listed as front.
- Plan to bleed the brakes and bed in new pads and rotors after fitting, if the job calls for it.
About this brake part for the Ford Mustang GTS
Brake parts are usually replaced per axle, left and right together, so the car stops straight.
Fitment notes
- Listed for: Ford Mustang GTS.
- Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.
Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.
Ask about fitmentParts that usually go with it
- Brake fluid. Old fluid absorbs water; flush it when you do a brake job.
- Hardware. Clips and pins wear with the pads.
More for your car: Brake Pads · Ford Parts · Brakes
Questions about Ford Mustang GTS brake part
Will this fit my Ford Mustang GTS?
Should I replace both sides?
Do I need new rotors with new pads?
Where do specs and warranty details come from?
Questions & answers
No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.