• GiroDisc Porsche 911 Carrera (996/997.1) Rear Dust Boot CDB2-031
1 1

GiroDisc Porsche 911 Carrera (996/997.1) Rear Dust Boot CDB2-031

GiroDisc Porsche 911 Carrera (996/997.1) Rear Dust Boot CDB2-031

Part number: 8QKN8

$28.00 USD
$28.00 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Porsche 911 CarreraFitment notes & questions

Rear Dust Boot by GiroDisc, made to fit the Porsche 911 Carrera as listed below. Piston and ring size depends on the bore, so match them to your block after it is measured.

Key features

  • Rear position

Specifications

  • Brand: GiroDisc
  • Part type: Piston
  • Position: Rear

Fitment for the Porsche 911 Carrera

Listed for the Porsche 911 Carrera, rear position. Check your year, model and trim against the title before you order.

What it does

Worn rings show up as oil burning, blow-by and low compression. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.

Installation & tips

  • Check ring end gaps in the bore before installation and stagger the gaps.
  • Bearings: Rod and main bearings are usually replaced at the same time.
  • Gasket set: The engine comes apart for this job.
  • Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.

FAQ

Which side or position does it fit?
It is listed for the rear position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

  • Confirm your year, make, model and trim match the fitment listed above (Porsche 911 Carrera).
  • Check the position: this part is listed as rear.
View full details

Before you order: Porsche 911 Carrera piston fitment

Pistons and rings seal the combustion chamber and turn pressure into motion.

Fitment notes

  • Listed for: Porsche 911 Carrera.
  • Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.

Not sure it fits? Send us your year, make, model, engine and trim and we'll check before you order.

Ask about fitment

Plan the whole job

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: All Pistons · Engine

Questions about Porsche 911 Carrera pistons

Will this fit my Porsche 911 Carrera?
It is listed for the Porsche 911 Carrera. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From the manufacturer. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question