• GiroDisc 10-13 Audi TT RS (8J) Front Dust Boot CDB1-152
  • GiroDisc 10-13 Audi TT RS (8J) Front Dust Boot CDB1-152
1 2

GiroDisc 10-13 Audi TT RS (8J) Front Dust Boot CDB1-152

GiroDisc 10-13 Audi TT RS (8J) Front Dust Boot CDB1-152

Part number: 8QKMQ

$28.00 USD
$28.00 USD
Sale Out of stock
Shipping calculated at checkout.
  • Ships direct from the brand or supplier
  • Tracking emailed when it ships
  • Free fitment check before you order

Listed for: Audi TT RSFitment notes & questions

Front Dust Boot by GiroDisc, made to fit the 2010–2013 Audi TT RS as listed below. Pistons and rings seal the combustion chamber and turn pressure into motion.

Key features

  • Front position

Specifications

  • Brand: GiroDisc
  • Part type: Piston
  • Position: Front

Fitment for the 2010–2013 Audi TT RS

Listed for the 2010–2013 Audi TT RS, front position. Check your year, model and trim against the title before you order.

What it does

Piston and ring size depends on the bore, so match them to your block after it is measured. Using the correct part for your exact engine keeps oil pressure, sealing and timing where the engine was designed to run, and doing related parts at the same time saves taking it apart twice.

Installation & tips

  • Check ring end gaps in the bore before installation and stagger the gaps.
  • Bearings: Rod and main bearings are usually replaced at the same time.
  • Gasket set: The engine comes apart for this job.
  • Work on a cool engine with the vehicle secured, and use a service manual for your vehicle for torque specs and procedures.

FAQ

Which side or position does it fit?
It is listed for the front position. If you are replacing both sides, check whether you need one of each.

Can I install it myself?
Many owners do this job at home with basic tools and a service manual for their vehicle. If you are not sure, have it fitted by a qualified mechanic.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

  • Confirm your year, make, model and trim match the fitment listed above (2010–2013 Audi TT RS).
  • Check the position: this part is listed as front.
View full details

About this piston for the Audi TT RS

Piston and ring size depends on the bore, so match them to your block after it is measured.

Fitment notes

  • Listed for: Audi TT RS.
  • Model years: 10-13. Parts can change mid-generation, so match the exact year.
  • Specs, lead time and warranty come from the manufacturer and supplier and can change. The details above this guide are the latest we have.

Not sure it fits? Tell us exactly what you drive and we'll confirm fitment first. It's free and saves a return.

Ask about fitment

Parts that usually go with it

  • Bearings. Rod and main bearings are usually replaced at the same time.
  • Gasket set. The engine comes apart for this job.

More for your car: Audi Parts · All Pistons · Engine

Questions about Audi TT RS pistons

Will this fit my Audi TT RS?
It is listed for the Audi TT RS. Check your year, model, engine and trim against the title and details above. If anything is different, contact us and we will confirm fitment before you order.
Standard or oversize?
Standard fits an unmachined bore. Oversize is for a bored cylinder.
Where do specs and warranty details come from?
From the manufacturer. Each brand sets its own specs, lead times and warranty terms, and they can change. The product details above are the latest we have.

Questions & answers

No questions yet about this part. Ask about fitment, what's in the box or installation and we'll answer here.

Ask a question
More parts for this car
Audi Parts