SLR Speed FC RX-7 Outer Lightweight Tie Rod & BumpSteer Kit for Factory Knuckles

FC RX-7 Outer Lightweight Tie Rod & BumpSteer Kit by SLR Speed. Highlights include 2x Machined spacers and 2x Tapered Studs. Steering parts connect the steering wheel to the front wheels.

Key features

• 2x Chromoly outer heim rod ends (adds 0.75" to 2.0" length to tube overall)
• 2x Machined spacers
• 2x Tapered Studs
• 2x Stover Nuts

Specifications

• Brand: SLR Speed
• Part type: Steering part

Options

• Tube Length: 89mm (3.5inch), 140mm (5.5 inch), 159mm (6.25 inch), 180mm (7 inch), 205mm (8 inch), 230mm (9 inch), 255mm (10 inch)
• Color: Purple, Grey

Fitment

This listing does not name specific vehicles. Match the part number and the specifications with the part you are replacing.

What it does

Any steering part change affects toe, so alignment follows. Worn suspension and steering parts show up as clunks, wandering, uneven tire wear and a vague feel; fresh parts restore control, and performance parts sharpen it.

Installation & tips

• Count the turns when removing tie rod ends to get close, then have the alignment set.
• Alignment: Needed after steering work.
• This part affects how the vehicle stops, steers or holds the road. If you are not sure how to fit it, have it installed or checked by a qualified mechanic.

FAQ

Can I install it myself?
Many owners do this job at home with the right tools and a service manual, but because it is a safety-related part, have the work checked by a qualified mechanic if you are not sure.

What should I check before ordering?
Compare the part number, specifications and fitment on this page with your vehicle and with the part you are replacing.

Before you order

• Measure the part you are replacing and compare it with the specifications above.
• Plan for a wheel alignment after fitting if the job changes the suspension or steering geometry.